Cold Spark Powder (100mg)

“\u003cp\u003eThe Cold Spark powder is packaged in 100gm airtight bags.\u003c\u002fp\u003e\r\n\u003cp\u003eMany operators use of a single bag of powder – one 100mg bag for two machines (1\u002f2 bag or 50gms for each machine)\u003c\u002fp\u003e\r\n\u003cp\u003e**********************************************************************\u003c\u002fp\u003e\r\n\u003cp\u003eDIRECTIONS FOR STORAGE OF POWDER\u003c\u002fp\u003e\r\n\u003cp\u003eThe bags should be kept in a cool area that is moisture free, if unopened, they can be stored for years\u003c\u002fp\u003e\r\n\u003cp\u003eIf opened and kept in a cool area that is moisture free, they should be reusable for approximately up to 3 months\u003c\u002fp\u003e\r\n\u003cp\u003e\u003cstrong\u003eCAUTION: STORAGE OF POWDER in an OPEN BAG will cause the powder to harden and render it unusable\u003c\u002fstrong\u003e\u003c\u002fp\u003e\r\n\u003cp\u003e**********************************************************************\u003c\u002fp\u003e\r\n\u003cp\u003eDIRECTIONS FOR USE OF THE POWDER AND COLD SPARKS MACHINE\u003c\u002fp\u003e\r\n\u003cp\u003eYou will get approx. 15 mins sporadic use from bag for each machine (shorter if you operate the machine for longer periods of time)\u003c\u002fp\u003e\r\n\u003cp\u003eYou should only use the machines sporadically as continuous use for a long length of time will cause the machine to overheat and then malfunction.\u003c\u002fp\u003e\r\n\u003cp\u003eUse the machine with short bursts of 8 15 seconds, then stop for a short amount of time for the internal parts to cool down (recommended 8 – 15 seconds).\u003c\u002fp\u003e\r\n\u003cp\u003e\u003cstrong\u003eCAUTION: CONTINUOUS NONSTOP OPERATION of the cold spark machine (with pauses\u002fstopping) WILL DAMAGE the internal parts and cause the machine to MALFUNCTION.\u003c\u002fstrong\u003e\u003c\u002fp\u003e\r\n\u003cp\u003e**********************************************************************\u003c\u002fp\u003e\r\n\u003cp\u003eIMPORTANT – DIRECTIONS FOR AFTER USE\u003c\u002fp\u003e\r\n\u003cp\u003eAfter use You must completely empty the machine of ALL powder\u003c\u002fp\u003e\r\n\u003cp\u003eTurn the machine upside and empty manually. Then turn the machine on and run sporadically until there are no longer any visual signs of any cold sparks\u003c\u002fp\u003e\r\n\u003cp\u003e\u003c\u002fp\u003e\r\n\u003cp\u003e\u003cstrong\u003eCAUTION: Leaving powder inside the machine WILL cause the powder to harden, VOID your warranty and cause your machine MALFUNCTION. Be sure to completely empty the machine immediately after using.\u003c\u002fstrong\u003e\u003c\u002fp\u003e”